![n1mm logger macros n1mm logger macros](http://ja1xuy.in.coocan.jp/N1MM_WW-Digi_Contest/pictures/N1MM-WW-DIGI_022.jpg)
Here is a quick video describing my setup: See the video below for a visual.Update: I found a fix to the, which would have been useful in most contests. The Icom 7300 N1MM Logger should be displaying the radio frequency at the top of the window next to the icon. Go back and verify the above settings and make sure your com ports are correct. If you do, something is not setup correctly. You will need to supply a separate CW keying interface between the computer and the KX3s Key jack.
![n1mm logger macros n1mm logger macros](http://n1mmwp.hamdocs.com/wp-content/uploads/2019/04/ClassicQSOP-CLMultsWindow.png)
#N1mm logger macros how to#
Also, instructions are included in how to use both 2Tone and Gritty as receive-only decoders. Footswitch (pin 6)=None and Radio Polling Rate=Normal. This guide is for those who want to get up and running on RTTY quickly with N1MM Logger Plus using MMTTY as the main digital interface. Mine is 9600, N, 8, 1, DTR (Pin4)=CW, RTS (pin 7)=PTT, Icom Code (hex)=94, Radio Nr=1, PTT Delay=30 and PTT via Radio Command SSB Mode is checked. Whenever I try to transmit or send a macro, fldigi crashes. When I select the digital mode in N1MM, it brings up some kind of modified fldigi window. Make sure your Com port is setup correctly. Tried to use digital modes with N1MM logger software.On the Hardware tab select the port that your CI-V cable is on and next to it choose the IC-7300 for the Radio.Click on Config, then select Configure Ports, Mode Control, Audio, Other….
#N1mm logger macros install#
Step four, if you don’t already have it, download and install N1MM Logger+. It’s free and you can find it here. I also followed the latest (as of ) guidance in. Setup: I set up TinyFSK with MMTTY as per Larry’s (K8UT) guidance in the Janupost. I have included a couple of extra settings that will help later on when using PSK31, RTTY (FSK) and CW keying. I have TinyFSK/MMTTY receiving and transmitting macros (partially) in N1MM Logger +, but there are issues. Set the following menu items under MENU>SET>Connectors. These are the changes, leave everything else to default settings. Step three, turn your radio on and setup the Icom 7300 using the radio’s menu. Tras el cambio de indicativo no sabía si crear una nueva base de datos en N1MM+, y en el manual online he encontrado que sí, es lo que recomiendan (una BD por indicativo): DATABASE FOR EACH DIFFERENT CALL SIGN If you use more than one call sign (including club call signs as well as call signs with. Do not connect the USB cable until you have downloaded and installed the driver.
#N1mm logger macros driver#
Step one, if you haven’t already, download and install the USB driver from Icom for your Icom IC-7300. If you just want to use a USB Cable with HRD and operate some PSK31 or RTTY (AFSK), take a look at this video. I have found this to be the easiest, because later on I added cw keying and RTTY (FSK) to the mix. Use the CI-V for rig control and the USB for the soundcard. One is the USB cable connected to the radios USB port and the other is a CI-V cable connected to the radios CI-V port.